- Bathrooms OnlineHome
- All Products
- Rinnai INFINITY® HD56kWe External Gas Continuous Flow Water Heater
- Rinnai INFINITY® HD56kWe External Gas Continuous Flow Water Heater
The Rinnai INFINITY® HD56kWe is an external continuous flow gas water heater for commercial premises and homes with high hot water demand. Available in Natural Gas or LPG, in a silver finish.
Features
- Nominal capacity: 32 litres/minute at a 25°C temperature rise
- Hot water flow range: 1.5–37 litres/minute
- 82% thermal efficiency
- Factory preset to 50°C; settings available up to 85°C
- Electronic ignition, status monitor and built-in frost protection
Gas Options
- Natural Gas — INFHD56N: 56.8 kW output; input 20.1–250 MJ/h
- LPG — INFHD56L: 56.4 kW output; input 20.1–245 MJ/h
Technical Details
- Appliance weight: 23 kg
- Nominal operating water pressure: 200–1000 kPa
- Hot, cold and gas connections: R¾ (20 mm)
Please note: Outdoor installation only. Select the correct gas type when ordering. Installation and commissioning require a licensed gasfitter. Electricity is required, including for frost protection. Not suitable for swimming pools, spas or hydronic heating. Refer to the separate specification and installation PDFs for dimensions, clearances and full requirements.
The Rinnai INFINITY® HD56kWe is an external continuous flow gas water heater for commercial premises and homes with high hot water demand. Available in Natural Gas or LPG, in a silver finish.
Features
- Nominal capacity: 32 litres/minute at a 25°C temperature rise
- Hot water flow range: 1.5–37 litres/minute
- 82% thermal efficiency
- Factory preset to 50°C; settings available up to 85°C
- Electronic ignition, status monitor and built-in frost protection
Gas Options
- Natural Gas — INFHD56N: 56.8 kW output; input 20.1–250 MJ/h
- LPG — INFHD56L: 56.4 kW output; input 20.1–245 MJ/h
Technical Details
- Appliance weight: 23 kg
- Nominal operating water pressure: 200–1000 kPa
- Hot, cold and gas connections: R¾ (20 mm)
Please note: Outdoor installation only. Select the correct gas type when ordering. Installation and commissioning require a licensed gasfitter. Electricity is required, including for frost protection. Not suitable for swimming pools, spas or hydronic heating. Refer to the separate specification and installation PDFs for dimensions, clearances and full requirements.
Related Products
Recently Viewed